Thyro A1A Series Single Phase SCR Controller 16 - 1500Amp 230VAC Phase(VAR), Burst(TAKT), Quick TAKT(QTM), VT(on Request), SWITCH Operating Modes
Rated 3.5/5 based on 11 customer reviews
Thyro A1A Series Single Phase SCR Controller 16 - 1500Amp 230VAC Phase(VAR), Burst(TAKT), Quick TAKT(QTM), VT(on Request), SWITCH Operating Modes

Thyro A1A Series Single Phase SCR Controller 16 - 1500Amp 230VAC Phase(VAR), Burst(TAKT), Quick TAKT(QTM), VT(on Request), SWITCH Operating Modes

Free Shipping for $300 Spend

Available: 5pcs in stock , more available more available in 4-6 weeks
$651.00
$716.10inclGST

Free Shipping for $300 Spend

Compare
This product: Thyro A1A Series Single Phase SCR Controller 16 - 1500Amp 230VAC Phase(VAR), Burst(TAKT), Quick TAKT(QTM), VT(on Request), SWITCH Operating Modes
$651.00 65100 716.1inclGST
Thyro Bus Module, 8 Channel programing interface for Thyro Series SCR Controllers
$1,065.00 106500 1.1inclGST
BCD2A0000 Temp Controller, 96x96mm, 100-240VAC, 4-20mA output
$288.00 28800 316.8inclGST
$2,004.00 2.2inclGST

Advanced Energy Thyro A1A Series Single Phase SCR Power Controller, Phase(VAR), Burst(TAKT), Quick TAKT(QTM), SWITCH Operating Modes

Features

  • Optional Profinet,Profibus,Ethernet,Modbus Comms
  • 230VAC +10/-57% Voltage, Current or Power Control
  • Built in Fuse
  • Smallest footprint on the market 
  • Single Phase Phase Angle & Burst Controller with SWITCH operation mode
  • SWITCH between Phase(VAR) or Burst(TAKT) control modes
  • Quick TAKT Mode (QTM), VT Mode (on request)
  • (0)4-20mA, 0(1)-5V, 0(2)-10V or POT input Proportional Control
  • Removable Cover
  • Potentiometer Adjustment
  • USB Configuration/Bias Setting
  • Synchronisation Function (dASM Module Reccommended)

Applications

  • Electrical Ovens, Kilns, or Furnaces
  • Primary Control of Transformer Loads in Phase or Burst Fire mode
  • AC Soft Starter (Combined with PLC)
  • Power Regulation Applications
  • Electric Boilers
  • Brewery Heating
  • Industrial Light Dimming
  • Suitable for extreme environments such as mining

    Series Optional Features

    For HRL

    • Current Control/Feedback
    • Programmable Relay Alarm Output
    • Load Monitoring
    • Analogue Output

    For HRLP

    •  As above with Power Control Feedback

    Communication Options

    Advanced Energy Thyro A1A Series Single Phase SCR Power Controller, Phase(VAR), Burst(TAKT), Quick TAKT(QTM), SWITCH Operating Modes

    Features

    • Optional Profinet,Profibus,Ethernet,Modbus Comms
    • 230VAC +10/-57% Voltage, Current or Power Control
    • Built in Fuse
    • Smallest footprint on the market 
    • Single Phase Phase Angle & Burst Controller with SWITCH operation mode
    • SWITCH between Phase(VAR) or Burst(TAKT) control modes
    • Quick TAKT Mode (QTM), VT Mode (on request)
    • (0)4-20mA, 0(1)-5V, 0(2)-10V or POT input Proportional Control
    • Removable Cover
    • Potentiometer Adjustment
    • USB Configuration/Bias Setting
    • Synchronisation Function (dASM Module Reccommended)

    Applications

    • Electrical Ovens, Kilns, or Furnaces
    • Primary Control of Transformer Loads in Phase or Burst Fire mode
    • AC Soft Starter (Combined with PLC)
    • Power Regulation Applications
    • Electric Boilers
    • Brewery Heating
    • Industrial Light Dimming
    • Suitable for extreme environments such as mining

      Series Optional Features

      For HRL

      • Current Control/Feedback
      • Programmable Relay Alarm Output
      • Load Monitoring
      • Analogue Output

      For HRLP

      •  As above with Power Control Feedback

      Communication Options

      Advanced Energy Part Number Thyro A1A 230VAC
      Approvals CE, UL508A, EU Directive 2014/35/EU & 2004/108/EC
      Control Accuracy 3% at rated voltage
      Rated Operating Temperature 45°C
      Temperature Derating 0.9 x Inom @ 50 Deg C, 1.1 x Inom @ 35 Deg C
      SCR Configuration Single Phase AC Switch
      Control Modes Phase(VAR), Burst(TAKT), QUick TAKT(QTM), Hybrid(VT on request)
      Control Input 4(0)-20mA, 0(1)-5V, 0(2)-10V, POT
      Load Current  16 to 1500 Amp @ 45 Deg C (110% @ 35 Deg C Max) 
      Control Range 0-100%
      Options Conformal Coating for Gas or High Humidity Environments
      Mounting Style Panel Mount
      Supply Voltage Range 230VAC +10/-15% (-57% with 24VDC Aux Supply)
      Soft Start Via PLC input
      Termination Style Screw
      Unit Weight 2.1 to 30kg
      Factory Pack Qty 1

       

      Guaranteed Delivery ETA:

      Estimated Delivery times are general in nature and do not take into account public holidays, weekends, and christmas closing periods.

      Delivery "countdown timer" estimates are based on domesitc Ausatraian deliveries to capital cities. Please consult your selected carrier for accurate delivery estimates. Fastron Electronics Store takes no responsibility for late or delayed shipments for hard to reach, or courier problems. We do however endeavour to choose our most trusted and reliable shipping providers.

      Lost Parcels:

       

      Fastron Electronics Strore reserves the right to investigate the lost parcel cause before issuing a replacement item. For Non-Courier deliveries to houses or mailboxes, Fastron Electronics Store takes no responsibiity for theft or lost parcels.

      Returns:


      Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

      To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

      Goods which are listed as backorder(non stock) at the time of order, or manufactured to order are exempt from being returned.

      To complete your return, we require a receipt or proof of purchase, order number or invoice number.

      Any item not in its original condition, is damaged or missing parts for reasons not due to our error, we are unable to offer a refund.
      Any item that is returned more than 30 days after delivery may be refunded less a restocking fee of 20% at the discretion of management. 

      LEM parts have 5 years Warranty from the date of dispatch from the LEM factory. This includes the time held in stock at Fastron warehouse.

      Shinko products carry a warranty of 3 years form date of dispatch from the SHinko Warehouse. This includes the time held in stock at Fastron warehouse.

      Warranty on all other parts is 12 months after date of dispatch from Fastron Warehouse.



      Refunds (if applicable)


      Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
      If you are approved, then your refund will be processed less a 20% restocking fee. A credit will automatically be applied to your credit card or original method of payment, within 7 days.

       

      Refunds (Free Shipping)

       

      If your order included Free shipping then the cost of shipping will be deducted from the final refund amount.



      Late or missing refunds (if applicable)


      If you haven’t received a refund yet, first check your bank account again.
      Then contact your credit card company, it may take some time before your refund is officially posted.
      Next contact your bank. There is often some processing time before a refund is posted.
      If you’ve done all of this and you still have not received your refund yet, please contact us at sales@fastron.com.au.



      Sale items (if applicable)


      Only regular priced items may be refunded, unfortunately sale items cannot be refunded.



      Exchanges (if applicable)


      We only replace items if they are defective or damaged under warranty. Warranty on LEM items is 5 years from delivery date from LEM factory. slow moving stock, and all other times have 12 months warranty. If you need to exchange it for the same item, send us an email at sales@fastron.com.au and send your item to: 9B Lakewood Bvd, Braeside VIC 3195, Australia.



      Shipping


      To return your product, you should mail your product to: 9B Lakewood Bvd, Braeside VIC 3195, Australia

      You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

      Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

      If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

      * - Free shipping excludes Heavy items such as some heatsink extrusions, and heavy items such as capacitors, large power controllers, and other particularly heavy items.

       

      Free Shipping

       

      Free shipped items are shipped via Australia Post standard parcel or satchel Delivery can be up to 5 working days from the following business day the order is placed.

        

      Shipping During Christmas Period

       

      Please note we do not ship during Christmas closing period. Our Christmas closing hours can be found in the Fastron News Blog