Setting up a temperature controller as an indicator

Setting up a temperature Controller as an indicator is as simple as setting the input to the correct Linear Voltage or Current such as 4-20mA, 0-20mA, 0-10V, 0-5V etc. The setting is intended for the specific transducer output. 

Once set you will then need to set the scaling high and low limits in order to display the correct number for the upper and lower limits such as 4mA = 0, and 20mA = 100. thsi woudl make the display show 100 for 20mA and 0 for 4mA. This exampel would be suitbale for a current or voltage transducer measuring 0-100V, or 0-100Amp.

For addtional advice on setting up a specifc Controller or Indicator, feel free to reach out the friendly sale steam at Fastron Electronics