Search results for "텔레:bpmc55~$다이어트약위고비심부름"

LEM AI-P1A M2 Accessory Kit, Multi Stacking Connector for AI-P1A Integrator, LEM Part# 90.T8.98.001.0 Application Cross Power Plug-in: side contacts to stack up to 3 Integrator modules and use only one power supply. Note: Included in 3pcs coil and integrator package Application Notes User Notice 1) The Rogowski coil can measure any primary current as there is no saturation effect. 2) Not tested given that in the worst case (load = 0 Ohm i.e. short circuit on the output) the peak dissipated power remains low (< 2 Watts) 3) Frequency bandwidth and phase shift modelling schematic can be provided on request. 4) Referring to the main phase offset of 90 ° (a Rogowski coil is a derivative current transducer) 5) Considering a primary conductor of at least ⌀ 15 mm, perpendicular and in contact with the Rogowski coil. 6) Considering an external conductor of at least ⌀ 15 mm the same current level than internal conductor, perpendicular and in contact with the Rogowski coil.  

Read more less

Schurter 4435.0395 TA35-CBDBF100C0-000, 2 Pole Rocker Switch, 10 AMP, 240VAC, 60VDC, Faston Connection, Black with I/O Embossed Thermal Circuit Breakers are used for over-current (overload and short-circuit) protection of electrical appliances, and as a disconnector in case of equipment failure/malfunction Description Rocker Switch 2-pole - Power tools Manual ON/OFF type Quick connect terminals 6.3 x 0.8 mm Features : < 3mS Trip Delay Time 2 Pole Disconnect 1kA Short Circuit Rating Suitable for 500VDC Isolation Applications: Power Tools Household Equipment Power Supplies and Chargers Industrial Appliances Standards : IEC 60934 2 x Ir: 5000 Cycles 500VDC Insulation Resistance 1.5kV (50Hz) Dielectric Strength Overload @ 6 x Ir Cos φ 0.6 IEC: min 40 trip                 @ 1.5 x Ir, cos φ 0.75 Allowable UL / CSA: min. 50 trips Specification Schurter Part Number 4435.0395 TA35-CBDBF100C0-000 Functions 2 Pole Rocker Switch, with 2 Bimetal Thermal Overload Circuit Breaker Nominal Voltage 240VAC @ 50Hz or 60VDC Nominal Current Range 10 Amp RMS Trip Delay Time < 3ms Rated Frequency 50/60 Hz Operating Temperature -25 to 60 Deg C Insulation Resistance 500VDC Illumination None Dielectric Strength 1.5kV (50Hz) Short Circuit Current 1kA Approvals UL, CSA Standards IEC 6094 Weight 10g Enclosure Material UL94 Factory Pack Qty 1   Datasheet Product Datasheet  

Read more less

Fastron FTM1-A40-V2-W0, Single Phase, Phase Angle/Burst Controller for Primary Control of Transformer (Phase Angle mode only), Voltage/Current/Power Limit Modes, For Single Phase Loads, 230VAC, 32 Amps @ 50 Deg C, Modbus RTU Features Phase Angle, and Burst Control Functions Made in China, Low cost Single Phase, Angle/Burst Controller 4-20mA/0-10V/0-5V input Proportional Control Phase Angle or Burst switching Digital Display and Controls Modbus RTU Applications Electrical Ovens, Kilns, or Furnaces HVAC Heaters Controlled Power Applications Electric Boilers Brewery Heating Industrial Light Dimming Suitable for HVAC or Industrial Environments   Specification Fastron Part Number FTM1-A40-V2-W0 Rated Operating Temperature 50°C SCR Configuration 3 Phase AC Switch Control Voltage 4-20mA/0-10V/0-5V/POT Load Current  32 Amps Per Phase @ 50 Deg C  Derating 2% per 1 Deg C (approx) Control Range 0-100% Alarms 1 x NO Relay Contacts Special Feature Internal Fuse, Current Limit, Power Limit Comms N/A Optional Mounting Style Panel Mount Switching Voltage Range 230VAC +/-10% Supply Voltage 230VAC +/-10% Dimensions H:260mm W:94mm D:187mm Soft Start N/A Termination Style Screw Unit Weight 2.5kg (4kg Packed) Factory Pack Qty 1   Technical Docs User Manual Brochure Video for How to Set Current/Voltage/Power limit

Read more less

Fastron FTM1-A80-V2-W0, Single Phase, Phase Angle/Burst Controller for Primary Control of Transformer (Phase Angle mode only), Voltage/Current/Power Limit Modes, For Single Phase Loads, 230VAC, 64 Amps @ 50 Deg C, Modbus RTU Features Phase Angle, Distributed Burst, and Time Proportional Burst Control Functions Made in China, Low cost Single Phase, Angle/Burst Controller 4-20mA/0-10V/0-5V input Proportional Control Phase Angle or Burst switching Digital Display and Controls Modbus RTU Applications Electrical Ovens, Kilns, or Furnaces HVAC Heaters Controlled Power Applications Electric Boilers Brewery Heating Industrial Light Dimming Suitable for HVAC or Industrial Environments   Specification Fastron Part Number FTM1-A80-V2-W0 Rated Operating Temperature 50°C SCR Configuration 3 Phase AC Switch Control Voltage 4-20mA/0-10V/0-5V/POT Load Current  64 Amps Per Phase @ 50 Deg C  Derating 2% per 1 Deg C (approx) Control Range 0-100% Alarms 1 x NO Relay Contacts Special Feature Internal Fuse, Current Limit, Power Limit Comms Modbus RTU Mounting Style Panel Mount Switching Voltage Range 230VAC +/-10% Supply Voltage 230VAC +/-10% Dimensions H:260mm W:94mm D:187mm Soft Start N/A Termination Style Screw Unit Weight 2.5kg (4kg Packed) Factory Pack Qty 1   Technical Docs User Manual Brochure Video for How to Set Current/Voltage/Power limit

Read more less

Crydom HS211A + A2450EG, Panel Mount Solid State Relay, 24VAC Control Input, LED Status, 24-280VAC Output, 25 Amps Features Ratings from 25A to 125 Amp @24-280 VAC SCR output for heavy industrial loads Zero voltage or instantaneous turn-on outputs UL/CE/ROHS Compliant Direct bond copper substrate Direct power lead frame Epoxy free design Panel Mount only Spec Part Number HS211A + A2450EG Switching Type Zero Crossing ROHS/CE/UL Yes Control Voltage 24VAC Load Current 22 Amp (rms) @ 40 Deg C Surge Capability 597 Amp (peak) Special Feature N/A Mounting Style Panel Mount Load Voltage Range 24-280VAC Max Non Repetitive Peak Voltage 600 Vp Termination Style Screw Terminals Dimensions L:81mm x W:45mm x D:73.4mm Unit Weight 296g Factory Pack Qty 20   Datasheet HS211A Series 1 AC Notifications Please note Changes from Gen 3 to Gen 4 (current) package design here App Notes Why Use SSR's? The inside story Selecting a SSR DC Output SSR's Selecting a Suitable Heatsink Use of Thermal Interface Material How to Verify the Proper Heatsink Effect of Forced Air Cooling Fuse Protection of SSR's Overvoltage Protection "P" Option MOV SSR Reliability Whitepaper 3 Phase Motors and Heating Applications 3 Phase Motor Reversing How to test a SSR SSR Precautions SSR Life Expectancy MTBF ROHS & Reach Statement Heatsink SSR and Heatsink Assemblies

Read more less

Rishabh CT 200/5 Class 1 15VA 86/40 (45), Current Transformer 300/5Amp CT 15VA HIGH BURDEN, Class 0.5, 36mm Aperture or 11x41mm Busbar Features DIN Rail Mounting Clip Included Built In Sealable Terminal Covers Mounting Feet Supplied Narrow Width (45mm) Self Powered Rated System Voltage 0.72/3kV IEC185, BS 7626, BSEN 60044-1 and IEC 60044-1 Applications Metering Equipment Energy Monitoring AC Power Control Systems Power Factor Correction Power Quality Measurements   Specification Rishabh Part Number CT 200/5 Class 1 15VA 86/40 (45) Technology AC Current Transformer Ratio 200/5 Aperture Size 36mm or 11x41mm Busbar VA Rating 15VA Accuracy Class Class 1 Output 5 Amp AC (+20%) Isolation 3kV (AC, 50Hz, 1 min) Bandwidth 50-60Hz Mounting Style Panel Mount/Din Rail Mount Operating Temperature Range -30°C / 85°C Continuous Current (max) 200Amp x 1.2 Termination Style Screw Unit Weight 300g Factory Pack Qty 9   Datasheet Product Datasheet  

Read more less

AMB-DVO(0-15)-A, 96x48mm DC Voltmeter, Bipolar 0-15VDC Input, 240VAC supply, Large 4.1 Digit Adjustable Zero and Span Setting Adjustable Display Scaling Large 4.1 Digit 20.3mm (8 Inch) LED Display 250mS Response Time PC 94 UL V0 Each unit needs just 96 x 48mm Panel Space 90mm Depth CE Approved Specification Alish Part Number AMB-DVO(0-15)-A, Conditioner Output N/A Input 0-15VDC Over Range x 1.5 Operating Temperature 0 - 60°C Supply Voltage 110-240VAC Span Adjustment Range +/-10% Zero Adjustment Range +/-5% Termination Style Screw Display Type 4.1 Digit RED LED Mounting Style 96 x 48mm Panel Mount Case Material PC - UL 94 V0 Weight 320g Factory Pack Qty 1   Datasheet Product Datasheet Application Notes Panel Meters Blog Articles

Read more less

Fastron FTCK Series Type K Thermocouples MIMS Class A, Standard Sizes and Lengths 3mm or 5mm Shaft, Braided SS/Fibreglass/Teflon Tail, 304 Stainless Steel Sheath, CE ANSI ROHS Approved, -20 to 800 Deg C Class A Accuracy CE, ANSI, ROHS Approved Kink proof Fiberglass Reinforced SS Braided Cable Low Long Term Drift Rated for -20 to 800 Deg C Max Spring Cable Connection 50 - 500mm or custom Sheath Thickness 3/5/9mm or custom MIMS Recommended to use BSP Fitting for mounting Specification Fastron Part Number FTCK Series Sensor Type Type K Thermocouple No of Wires 2 Probe Length 50-500mm or custom Sheath Thickness 3/6/9mm or custom Sheath Material SS 304 Stainless Steel Aprovals CE, ANSI, ROHS Accuracy Class A Cable length 3 Meters (Standard) or custom Cable Type Teflon/Fibreglass/Braided Stainless Steel Temperature Range -20 to 800 Deg C Special Feature Spring Cable Strain Relief Mounting Style BSP Bayonet or Flange Fitting Recommended Weight 300-500g Factory Pack Qty 1 Datasheet Type K Datasheet Type K 100mm Datasheet Type K 50mm Datasheet

Read more less

Powersem PSDH70/16, 3 Phase Half Controlled Bridge, 70 Amp, 1600V, Spade Connections, Can Replace Semikron SKCH28, SKCH43 or SI S3PHBD70 series Features Half Controlled Braking/Freewheeling Diode Package with DCB ceramic base plate Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL registered, E 148688 Applications Lift Motor Control with Braking Heat and temperature control for industrial furnaces and chemical processes Lighting control Motor control Power converter Advantages Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Specification Powersem Part Number PSFD70/16 AC Line voltage 533V Device Configuration Three Phase Half Controlled Rectifier Bridge DC Output @ 85 Deg C 70 Amp Package Size W:29mm L:68mm D:17mm Itsm 550 A VF(to) 0.85V Tj(max) 125°C rF 11mΩ Terminals Faston (6.3mm) Hole Centres 68mm (M5) Gate Terminals M3 (1.5Nm) R th(j-c) 0.9°C/W R th(c-h) 0.20°C/W Weight 100g Isolation 3kV Factory Pack Qty 10 Certification UL Listed Powersem Headquarters Germany   Datasheet Product Datasheet Alternatives See PSDF70/16 for alternative with freewheeling diode  

Read more less

LEM LF 2010-S, C/L Hall Effect Sensor, 2000 Amp, +/-400mA Output, 60.5mm Aperture, +/-15..24V Supply, Panel Mount Features Bipolar and insulated current measurement up tp 2700 Amp Current output Bandwidth DC to 100kHz Closed loop (compensated) current transducer Panel mounting Insulated plastic case recognized according to UL 94-V0 Advantages Very good linearity High accuracy Low offset drift over temperature Wide frequency bandwidth Very low insertion losses High immunity to external interference Current overload capability Low power consumption Applications Windmill Inverters Test and Measurement Substations AC variable speed drives and servo motor drives Static converters for DC motor drives Battery supplied applications Uninterruptible Power Supplies (UPS) Switched Mode Power Supplies (SMPS) Power supplies for welding applications Application Domain Industrial Standards EN 50178:1997 IEC61010-1:2010 UL 508:2010 Specification LEM Part Number LF 2010-S Technology Closed Loop Hall Effect Aperture ø60.5mm ROHS Yes Supply Voltage +/- 15 VDC to +/- 24 VDC Bipolar, Isolated Load Current (RMS + DC) 2000 Amp Measurement Range +/- 3000 Amp Output 400 mA Isolation 6 kV Bandwidth DC-150 kHz Mounting Style Panel Mount Operating Temperature Range -10°C / 85°C Accuracy 0.2% Termination Style Molex 6410 Unit Weight 503g Factory Pack Quantity 9   Datasheet Product Datasheet Application Notes LEM Applications Manual 3rd Edition  

Read more less

Enerpro LVR-31 Kit, 3 Stage, Smart Battery Charger for Locomotive/Train 78/70VDC 90 Amp The LVR-31 replaces the older EMD 8330790 auxiliary generator constant voltage regulator.  The VR-31 replaces the EMD VR-10-16 constant voltage regulator. Enerpro’s 3-stage charging has proven to increase battery life and reduce no  start events on locomotives that are repeatedly started and shut down.  There are over 3,800 of the VR, DVR, and LVR variants. 3-stage charging is the industry standard method of charging lead acid storage batteries.  All modern industrial chargers (fork lift, data center, etc.) use 3-stage charging.  Enerpro introduced it to the locomotive market in 2010 and received a US Patent. All Progress Rail and Wabtec locomotives now come with 3-stage charging as a standard feature. Features 100% USA Made 3 Stage, Smart Battery Charger Kit includes the EBCS-3 current sensor Stage 1: Constant 90 Amp Safe Initial charge Stage 2: Constant 78 Volts Charge to 95% Stage 3:Constant 72 Volts to maintain charge LVR-31 Kit Includes 1 x LVR-31 Battery Charge Controller, 1 x 5.7 Ohm 750W Resistor, 1 x Feedback Current Sensor Applications Locomotive/ Railways battery Charger Industrial battery chargers Any suitable 72V battery system  Extend the life of any batteries Specification Enerpro Part Number LVR-31 Kit Rated Operating Temperature 50°C Stage 1 Charge 4-20mA, 0-5V, 0-10V, 10K POT (4-20mA default calibration) Stage 2 Charge Depends on SCR stack Stage 3 Charge 0-100% Special Feature See Optional Card Sets below Mounting Style Panel Mount Termination Style Connector (see datasheet) Unit Weight 11kg Factory Pack Qty 1   Technical Docs Brochure Drawing Troubleshooting Guide

Read more less

Rishabh CT 150/5 Class 0.5 3.75VA 62/30 (40) Series Current Transformer Features DIN Rail Mounting Clip Included Built In Sealable Terminal Covers Mounting Feet Supplied Narrow Width (45mm) Self Powered Rated System Voltage 0.72/3kV IEC185, BS 7626, BSEN 60044-1 and IEC 60044-1 Applications Metering Equipment Energy Monitoring AC Power Control Systems Power Factor Correction Power Quality Measurements   Specification Rishabh Part Number CT 150/5 Class 0.5 3.75VA 62/30 (40) Technology AC Current Transformer Ratio 150/5 Aperture Size ⌀ 30mm or 26x10mm Busbar VA Rating 3.75VA Accuracy Class Class 0.5 Output 5 Amp AC (+20%) Isolation 3kV (AC, 50Hz, 1 min) Bandwidth 50-60Hz Mounting Style Panel Mount/Din Rail Mount Operating Temperature Range -30°C / 85°C Continuous Current (max) 150Amp x 1.2 Termination Style Screw Unit Weight 300g Factory Pack Qty 9   Datasheet Product Datasheet  

Read more less