DR6760D75P, Solid State Relay, and Heatsink Assembly, 3 Phase 4-32VDC Control, 62.5 Amp per phase @ 40 Deg C, 48-600VAC Load, LED Status Indicator, Overvoltage Protection
Features
Ratings from 25A to 50 Amp @ 70-530 VAC
SCR output for heavy industrial loads
Zero voltage or Instantaneous turn-on outputs
UL/CE/ROHS Approved
IP20 Cover Available
AC & DC control types
Direct bond copper substrate
Direct power lead frame
Epoxy free design
Spec
Crydom Part Number
DR6760D75P
Switching Type
Zero Crossing
ROHS/CE/UL
Yes
Control Voltage
4-32VDC
Load Current
3 x 75 Amp (rms) per Phase @ 30 DeG C
Surge Capability
1290 Amp (peak)
Special Feature
LED Status Indicator, Overvoltage Protection
Mounting Style
Din Rail Mount
Load Voltage Range
48-600VAC
EMC Compliant
Level 3
Termination Style
Screw
Unit Weight
961g
Factory Pack Qty
10
Datasheet
DR6760D30P
3 Phase SSR and Heatsink Mounted
App Notes
Why Use SSR's?
The inside story
Selecting a SSR
DC Output SSR's
Selecting a Suitable Heatsink
Use of Thermal Interface Material
How to Verify the Proper Heatsink
Effect of Forced Air Cooling
Fuse Protection of SSR's
Overvoltage Protection "P" Option MOV
SSR Reliability Whitepaper
3 Phase Motors and Heating Applications
3 Phase Motor Reversing
How to test a SSR
SSR Precautions
SSR Life Expectancy MTBF
ROHS & Reach Statement
Enerpro LVR-31 Kit, 3 Stage, Smart Battery Charger for Locomotive/Train 78/70VDC 90 Amp
The LVR-31 replaces the older EMD 8330790 auxiliary generator constant voltage regulator. The VR-31 replaces the EMD VR-10-16 constant voltage regulator.
Enerpro’s 3-stage charging has proven to increase battery life and reduce no start events on locomotives that are repeatedly started and shut down. There are over 3,800 of the VR, DVR, and LVR variants.
3-stage charging is the industry standard method of charging lead acid storage batteries. All modern industrial chargers (fork lift, data center, etc.) use 3-stage charging. Enerpro introduced it to the locomotive market in 2010 and received a US Patent. All Progress Rail and Wabtec locomotives now come with 3-stage charging as a standard feature.
Features
100% USA Made
3 Stage, Smart Battery Charger
Kit includes the EBCS-3 current sensor
Stage 1: Constant 90 Amp Safe Initial charge
Stage 2: Constant 78 Volts Charge to 95%
Stage 3:Constant 72 Volts to maintain charge
LVR-31 Kit Includes 1 x LVR-31 Battery Charge Controller, 1 x 5.7 Ohm 750W Resistor, 1 x Feedback Current Sensor
Applications
Locomotive/ Railways battery Charger
Industrial battery chargers
Any suitable 72V battery system
Extend the life of any batteries
Specification
Enerpro Part Number
LVR-31 Kit
Rated Operating Temperature
50°C
Stage 1 Charge
4-20mA, 0-5V, 0-10V, 10K POT (4-20mA default calibration)
Stage 2 Charge
Depends on SCR stack
Stage 3 Charge
0-100%
Special Feature
See Optional Card Sets below
Mounting Style
Panel Mount
Termination Style
Connector (see datasheet)
Unit Weight
11kg
Factory Pack Qty
1
Technical Docs
Brochure
Drawing
Troubleshooting Guide
Advanced Energy Thyro S 2S Series 2 Leg 3 Phase Solid State Contactor, Burst(TAKT)Firing Mode Only. Compatible Replacement for Eurotherm
Features
400VAC +10/-57% Line to Line Voltage, Current or Power Control
Smallest footprint on the market
Built in Fuses
3 Phase, 2 Leg Economical Burst Controller Firing Mode
(0)4-20mA, 0(1)-5V, 0(2)-10V or POT input Proportional Control
Removable Cover
USB Configuration/Bias Setting
Potentiometer Adjustment
Synchronisation Function
Applications
Electrical Ovens, Kilns, or Furnaces
Primary Control of Transformer Loads in Phase or Burst Fire mode
Resistive Loads up to 6:1 Hot/Cold Ratio
AC Soft Starter (Combined with PLC)
Power Regulation Applications
Electric Boilers
Brewery Heating
Industrial Light Dimming
Suitable for extreme environments such as mining
Series Optional Features
For HRL
Current Control/Feedback
Programmable Relay Alarm Output
Load Monitoring
Analogue Output
For HRLP
As above with Power Control Feedback
Communication Options
Standard Thyro Bus Module
BasicBus Module
Specification
Advanced Energy Part Number
Thyro S 2S 400VAC
Approvals
CE, UL508A, EU Directive 2014/35/EU & 2004/108/EC
Control Accuracy
3% at rated voltage
Rated Operating Temperature
45°C
Temperature Derating
0.9 x Inom @ 50 Deg C, 1.1 x Inom @ 35 Deg C
SCR Configuration
Single Phase AC Switch
Control Modes
2 Leg Burst(TAKT) for low dissipation
Control Input
4(0)-20mA, 0(1)-5V, 0(2)-10V, POT
Load Current
16 to 1500 Amp @ 45 Deg C (110% @ 35 Deg C Max)
Control Range
0-100%
Options
Conformal Coating for Gas or High Humidity Environments
Mounting Style
Panel Mount
Supply Voltage Range
400VAC +10/-15% (-57% with 24VDC Aux Supply)
Soft Start
Via PLC input
Termination Style
Screw
Unit Weight
2.1 to 74kg
Factory Pack Qty
1
Technical Docs
Brochure
User Manual
2 Leg Control Application Blog
Thyro A Series Quick Installtion Guide
Setting Up Comms on Thyro A Series Controllers
Anybus Device Ethernet IP Setup Guide
