Oztherm Phase Angle Controller Special (SP) Builds
Oztherm Phase Angle Controller Special (SP) Builds
F311 Series Single Phase, Phase Angle Controller
|
Fastron - Oztherm Special (SP) Number
|
Description of Special Feature
|
Reccommended Application
|
|
F311-1-25DC-C-F-SP04
|
Half Controller Bridge with Flywheel Diode
Voltage Controller with POT Input
|
|
|
F311-4-40DC-F-MV-SP05
|
370VDC Half Controlled Bridge with, Flywheel Diode, Suppression and Overvoltage Varistor
|
0-370VDC Power Supply
|
|
F311-4-N/A-SP06
|
Current Trip Relay NC
|
|
|
F311-4-750W-C-F
|
F11-4-N/A-C Mounted on Gear Tray C/W 1M Gate Leads, Supplied Loose with Square Body Fuse and 750/5 CT
|
|
|
F311-4-N/A-C-SP08
|
Zero Ramp (C15 Removed), Mounted on Aluminium Gear Tray 260x180x3mm, 500mm Gate Leads 250/5 Amo Ct Supplied Loose, Input 0-10V
|
|
|
F311-2-25DC-F-CI-SP09
|
Controller Rectifier, Internal CT
|
|
|
F311-480-65-CI-F-SP10
|
Internal Fuse, Mounted 10K POT and 0-100% Escutcheon on Cover with knob, 4M 4 Core + Earth Cable Supplied1.35PVC/PVC Orange Circular 10MM Loose
|
|
|
F311-48-25-CI-SP11
|
GBPC3510 Mounted on Heatsink for DC output, Internal CT
|
20V,15 Amp Power Supply
|
|
F311-220-25-CI-SP11
|
GBPC3510 Mounted on Heatsink for DC output, Internal CT
|
|
|
F311-2-25-CCE-F-SP11A
|
Current Control, Supplied with HAS 50-S
|
|
|
F311-2-100-CI-F-T-SP12
|
Current Trip Time Constant = 220mS, Soft Start, 3 - 75 Second Ramp up Ramp Down.
|
Soft Starter
|
|
F311-4-300F-C-F
|
Gear Tray Mounted COntroller + ST6157, 0-10K POT & 4-20mA switchable inputs, Loose CT, POT to 4-20mA Converter
|
|
|
F311-SP15
|
0-1V output from MI terminals, 0-1V Control Input, MI connected to DCL33AA/M as converter.
|
|
|
F311-480-40-CC-F-SP16
|
Constant Current for Inductive Load, Blocking Diode
|
|
|
F311-4-25-CI-F-SP17
|
5-10 second ramp setting range, Control input set to 0-100% permanently, Gain POT still functional to allow phasing back a fixed amount.
|
|
|
F311-2-22-A-F-PW-MP-SP18
|
Set to 22 Amp Full Scale, internal Fuse, MP set to maximum level to suit Signal Conditioner, Set to constant power source with voltage limit and current trip.
|
Bag Sealing Element Control
|
|
F311-2-8-A-F-PW-MP-SP19
|
Set to 8 Amp Ful Scale, internal Fuse, MP set to maximum level to suit Signal Conditioner, Set to constant power source with voltage limit and current trip.
|
Bag Sealing Element Control
|
|
F311-4-N/A-SP20
|
Use as Half Wave Rectifier, 10K Control Input
|
DC Power Supply
|
|
F311-4-N/A-SP21
|
Constant Current, Constant Voltage
|
Chlorinator
|
|
F311-2-60--N/A-C-SP22
|
60hz with Current Limit delay
|
|
|
F311-2-N/A-C-SP23
|
Current Limt Delay, Check Flashing at turn on
|
|
|
F311-140-100-F-SP24
|
140V Transformer, Internal Fuse
|
|
| F311-4-50-C-MI-F-SP25 | 0-1V MI output for DCL 0-1V to 4-20mA converter mode | |
| F311-4-180F-CI-F-T-SP028 | SP=No ramp | |
| F311-4-300F-CI-F-T-SP029 | SP=No ramp | |
| F311-4-100F-SP30 | DC controlled bridge with Freewheel diode, 5V I/P, no ramp & special cover/connectors | |
| F311-4-N/A-C-MI-T-SP031 | 400mm Gate leads soldered to board, mounted on aluminium plate and CT 132 D5 75/5 CT's supplied loose | |
| F311-380-N/A-CE-SP32 | Control Card only same as S/N 9807 3678 Page 117. Card set up for 0-12VDC input into into PCB from a HTA100S. 12V = 300ADC. (1.5kohm in parallel with 390ohms.) | |
| F311-4-200F-C-F-SP33 | SP=No ramp supplied with loose fuses to suit 200F | |
| F311-2-N/A-CC-SP034 | Modified to suit customer requirements | |
| F311-4-350F-C-F-SP35 | uses 1 x H31/250MA with 1 x TT285N14TOF fan cooled, using standard side plates and covers. loose 400/5 CT and 350BBF fuse kit. | Foam Wire Cutter |
| F311-4-N/A-C-T-SP36 | Card built onto 180 x 260mm aluminium gear plate; 1m gate leads, Zero start/stop RAMP | |
| F311-4-100-CI-F-SP037 | Fuse Mounted internally like the CI option. | |
| F311-4-N/A-C-SP38 | ||
| F311-4-N/A-CC-T-SP39 | As per the SP36 with 0-10VDC external current limit input and lowest current limit delay possible. | |
| F311-4-N/A-SP040 | PCB replacement for original F311-4-N/A-SP001 (Green Book) Remove C15. Set ramp to Minimum. Ramp Pot fully anti-clockwise. No cables. | Spot Welder |
| F311-4-N/A-SP041 | Card only. Same as SP008 without gear plate, gate leads or CT. | |
| F311-4-75-C-FI-SP42 | Half Wave Output Control, Internal Fuse | Vibration Machine |
F312 Series Single Phase, Phase Angle Control Module for SSR's
Fastron - Oztherm Special (SP) Number |
Description of Special Feature |
Reccommended Application |
| F312-60-VP-SP02 | 60V Transformer, CI with External 10K POT | |
| F312-2-VA-SP03 | with DRA1-CX480D5R | |
| F312-2-VP-SP04 | 45 Second Ramp Up, 10K Resistor built in, Votl Free Contact to Enable/Disable Controller | |
| F312-2-VP-SP05 | Additional External Span | Laboratory, Incubators |
| F312-4-VP-SP05 | Additional External Span | Laboratory, Incubators |
F330 Series 3 Phase, Phase Angle Controller
Fastron - Oztherm Special (SP) Number |
Description of Special Feature |
Reccommended Application |
F430 Series 2 Leg, Burst Fire Controller
Fastron - Oztherm Special (SP) Number |
Description of Special Feature |
Reccommended Application |
F431 Series 3 Phase, Burst Fire Controller
Fastron - Oztherm Special (SP) Number |
Description of Special Feature |
Reccommended Application |
F920 Series AC/DC Current Transducer with Process Output
Fastron - Oztherm Special (SP) Number |
Description of Special Feature |
Reccommended Application |
Please contact us for special project quotes, or technical information and support. For special quotes please advise the part number, yearly qty and target price if known. Fastron Electronics is located at ADDRESS: 32 Shearson Crescent, Mentone Victoria - 3194 Australia. Or Phone +61(0)397635155