Technical Data	FRV 8-02
Supply and measuring	50-270VAC
Measured voltage	65-260VAC / 50 Hz
Level Umax	112.5 % Un
Level Umin	83 % Un
Burden	max. 2 VA
Hysteresis	2 %
Max. permanent overload	270 VAC/DC
Time delay T1	max. 500 ms
Time delay T2	adjustable 0.1-10 s
Output
Number of contacts	1 x changeover/ SPDT (AgNi / Silver Alloy)
Current rating	10 A / AC1
Breaking capacity	2500 VA / AC1, 240 W / DC
Inrush current	10 A
Switching voltage	250 V AC1 / 24 V DC
Min. breaking capacity DC	500 mW
Indication of state	red LED
Mechanical life	1 x 107
Electrical life (AC1)	1 x 105
Other information
Operating temperature	-20 ... +55 °C
Storage temperature	-30 ... +70 °C
Electrical strength	4 kV (supply - output)
Operating position	any
Mounting	DIN rail EN 60715
Protection degree	IP 40 from front panel / IP 10 terminals
Overvoltage cathegory	III.
Pollution degree	2
Max. cable size (mm )2	solid wire max. 2x2.5 or 1x4 ; with sleeve max. 1x2.5 or 2x1.5
Dimensions	90 x 17,6 x 64 mm
Weight	69 g
Standards	EN 60255-6, EN 61010-1, CE

• Product Datasheet
• Fastron Monitoring/Time Relays Catalogue

For items in our catalogue which are not listed online please Contact Us for Possible Replacement

Relay in 3-phase main monitors size of phase voltage. It is possible to set two independent voltage levels and thus it is possible to set two independent voltage levels and monitor e.g. undervoltage and overvoltage independently. In normal state when voltage is within set levels, output relay is closed and red LED shines.

In case voltage exceeds or falls below the set levels, output relay opens and red LED shines ( LED indicates faulty state – flashes when timing). In case supply voltage falls below 60 % Un (U_OFF lower level)relay immediately opens without delay and faulty state is indicated by red LED.In case timing is in progress and faulty state is indicated, timing is immediately stopped.

Guaranteed Delivery ETA:

Estimated Delivery times are general in nature and do not take into account public holidays, weekends, and Christmas closing periods.

Delivery "countdown timer" estimates are based on domestic Australian deliveries to capital cities. Please consult your selected carrier for accurate delivery estimates. Fastron Electronics Store takes no responsibility for late or delayed shipments for hard to reach, or courier problems. We do however endeavour to choose our most trusted and reliable shipping providers.

Lost Parcels

 

Fastron Electronics Store reserves the right to investigate the lost parcel cause before issuing a replacement item. For Courier deliveries to houses or mailboxes, Fastron Electronics store takes no responsibility for theft or lost parcels, unless the customer has specifically requested cargo insurance.

Lost Aus Post Parcels

 

Customers who select Aus Post delivery do so at their own risk. Fastron will not take any responsibility for lost Aus Post parcels.

Returns

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Goods which are listed as backorder(non stock) at the time of order, or manufactured to order are exempt from being returned.

To complete your return, we require a receipt or proof of purchase, order number or invoice number.

Any item not in its original condition, is damaged or missing parts for reasons not due to our error, we are unable to offer a refund.
Any item that is returned more than 30 days after delivery may be refunded less a restocking fee of 20% at the discretion of management. 

LEM parts have 5 years Warranty from the date of dispatch from the LEM factory. This includes the time held in stock at Fastron warehouse.

Fastron products carry a warranty of 1 year from date of dispatch from the our warehouse. This includes the time held in stock at Fastron warehouse.

Warranty on all other parts is 12 months after date of dispatch from Fastron warehouse.

Fastron PID Temperature Controllers carry 3 year warranty and offer return to base replacement only.

Cancellations

 

Items which have already been shipped can not be cancelled.

Items which have been packaged and not yet shipped will incur a 10% restocking fee upon cancellation.

Non stocked items which have already been ordered from our supplier can not be cancelled under any circumstances. 

Note: these fees or conditons may be waived if an item or equal or greater value is to be exchanged. Ultimately the decsion will be at the sales managers discretion.

Refunds (if applicable)

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. Refunds are typically rejected for 'change of mind' or incorrectly ordered items. 
If you are approved, then your refund will be processed less a 20% restocking fee. A credit will automatically be applied to your credit card or original method of payment, within 7 days. 

If substituted for an item of equal or greater value restocking fee may be waived as long as the goods are in original packaging and as new resalable condition.

Refunds for incorrectly supplied items or error in a parts website description will be refunded without question including the shipping fee.

 

Refunds (Free Shipping)

 

If your order included Free shipping then the cost of shipping will be deducted from the final refund amount.

Late or missing refunds (if applicable)

If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at sales@fastron.com.au.

Sale items (if applicable)

Only regular priced items may be refunded, unfortunately sale items cannot be refunded.

Exchanges (if applicable)

We only replace items if they are defective or damaged under warranty, or the fault lies with Fastron. Warranty on LEM items is 5 years from delivery date from LEM factory. Slow moving stock and all other times have 12 months warranty. If you need to exchange it for the same item, send us an email at sales@fastron.com.au and send your item to: 9B Lakewood Bvd, Braeside VIC 3195, Australia. Any offer for exchange is subject to management approval.

Shipping

 

Shipping During Christmas Holiday Period will be limited to domestic Australia Post shipping methods. Overseas and courier deliveries will be shipped out on the 1st day back from holidays. Please refer to our News Blog for christmas  closure dates

To return your product, you should mail your product to: 9B Lakewood Bvd, Braeside VIC 3195, Australia

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

* - Free shipping excludes Heavy items such as some heatsink extrusions, and heavy items such as capacitors, large power controllers, and other particularly heavy items.

 

Free Shipping

 

Free shipped items are shipped via Australia Post standard parcel or satchel Delivery can be up to 5-7 working days from the following business day the order is placed.

Note: Free shipping is NOT available for discounted products via discount coupon, wholesale or email orders unless clearly specified.

  

Shipping During Christmas Period

 

Please note we do not ship during Christmas closing period. Our Christmas closing hours can be found in the Fastron News Blog